How to Setup Amped Wireless Range Extender?

Bothered with Amped wireless range extender setup steps? You are at the perfect page, refer to the following instructions to set up!

Amped extenders prove to be best by repeating and extending the WiFi network to the area where you are not able to receive proper wireless signals. Amped extenders are easy to set up, install and connect to your home network. The web domain setup.ampedwireless.com allows the users to easily configure their Amped device to enjoy extended home network. 

Just go through the following instructions and setup Amped wireless extender and get going!

Starting with the Amped wireless setup process, you need to get into setup.ampedwireless.com web page. Follow the steps to get your Amped extender up and running-

 

1. Plug your amped device into a wall outlet and turn it ON.

2. Connect your computer to an amped network over a wifi or using Ethernet cable.

3. Turn on your computer and open the web browser of your choice. Type setup.ampedwireless.com into the address bar. Or, use the amped extender default ip address 192.168.1.240.

4. Once you enter the web address, you will get redirected to amped extender login page. In this page, you will be asked to provide the default username and password. You can find the default login credentials on the label of the device.

5. You will see the Amped wireless setup dashboard.

6. Click on the ‘Scan now’ option and wait for a few seconds.

7. The setup wizard will display a list of available networks. You can select your router network.

8. Enter the router wifi password and hit ‘Next’ to continue.

9. Wait for the amped extender to connect your home network.

10. Once it is done, you can change wifi settings of the amped device.

11. Provide a new wifi network name and password to the amped network.

12. Click ‘Apply’ to save the changes.

Most of the users with less technical knowledge often find issues with amped wireless range extender setup while using setup.ampedwireless.com. In such a situation, you can setup amped wireless extender using a WPS (Wi-Fi Protected setup) method.

1. This can only be done if your wireless router has a WPS button and supports the WPS process. Follow the following steps for Amped wireless setup-

2. Press the amped extender in a close proximity to router.

3. Connect your amped extender to a power source.

4. Press and hold the WPS button on the amped device for 2-3 minutes.

5. You will notice that power LED will start to blink.

6. Press the WPS button on the wireless router.

7. Thereafter, amped extender will automatically configure and establish the settings of wireless router.

If you would need any further information on how to setup amped wireless range extender or have any issues related to Amped wireless setup, feel free to get connected to our technical team.